LOCTITE MR 5923 liquid sealant for rocker covers and oil pans - jar - 450ml

Details about : LOCTITE MR 5923 liquid sealant for rocker covers and oil pans - jar - 450ml

LOCTITE MR 5923 (450ml) is a low-viscosity liquid sealant for rocker covers and oil pans, available at . Once applied, it dries slowly to a flexible, tacky film after evaporation. Drying time varies with temperature, humidity and clearance. Typical applications include pre-cut rigid or flexible joint assemblies.
It resists water, ethylene glycol, gasoline, engine oils and transmission fluids.

ADVANTAGES :
- Professional format.
- Sealant remains flexible after drying.
- Ideal for assembling parts after repairs.
- Low viscosity.

FEATURES :
- Seal type: rigid or flexible
- Operating temperature : -54 to 204°C
- Oil resistance: good
- Water/glycol resistance: good
- Capacity: 450 ml

USE COUNCIL:
- Remove all old product from joint surfaces.
- For best results, clean and dry surfaces
surfaces with a clean solvent.
- Remove cap. Apply with the applicator pad.
- If used as a sealant, spread evenly with a spatula.
evenly with a spatula on one side of the joint
then position it on the assembly. Coat the
second side of the joint, then assemble the parts.
(its slow drying gives more time to these operations).
- Assembly is operational within 4 hours, with full hardening
full hardening takes place 24 hours later.
- The product can be removed from metal surfaces
isopropyl alcohol. If the product has been dry for
or if it has been subjected to high temperatures
temperatures, cover the joint with alcohol and allow it to soften
overnight.

ATTENTION: aerosols, resins, sealants and other chemical products cannot be shipped by air (DOM TOM)!

Please observe the usual precautions.

Original reference:

LOCTITE MR5923