6-in-2 stainless steel sport exhaust manifold for BMW 3 Series E36 Sedan, Touring Coupé and Cabriolet 6-cylinder - M50 and M52 engines

Details about : 6-in-2 stainless steel sport exhaust manifold for BMW 3 Series E36 Sedan, Touring Coupé and Cabriolet 6-cylinder - M50 and M52 engines

Sport exhaust manifold 6 in 2 - 100% polished STAINLESS STEEL for BMW 3 series E36 with 6-cylinder engine:

Sedan :
- 320i 150hp from 01/1990 to 06/1992 (engine code M50B20)
- 320i 150hp from 07/1992 to 09/1995 (engine code M50B20TU)
- 320i 150hp from 12/1993 to 05/1998 (engine code M52B20)
- 323i 170hp from 07/1994 to 05/1998 (engine code M52B25)
- 325i 192hp from 11/1989 to 06/1992 (engine code M50B25)
- 325i 192hp from 07/1992 to 07/1995 (engine code M50B25TU)
- 328i 193hp from 07/1994 to 04/1998 (engine code M52B28)

Touring :
- 320i 150hp from 05/1994 to 05/1999 (engine code M52B20)
- 323i 170hp from 07/1995 to 05/1999 (engine code M52B25)
- 328i 193hp from 10/1994 to 05/1999 (engine code M52B28)

Coupé :
- 320i 150hp from 02/1991 to 07/1992 (engine code M50B20)
- 320i 150hp from 08/1992 to 07/1995 (engine code M50B20TU)
- 320i 150hp from 01/1994 to 11/1998 (engine code M52B20)
- 323i 170hp from 07/1994 to 04/1999 (engine code M52B25)
- 325i 192hp from 10/1990 to 08/1992 (engine code M50B25)
- 325i 192hp from 08/1992 to 07/1995 (engine code M50B25TU)
- 328i 193hp from 07/1994 to 04/1999 (engine code M52B28)

Cabriolet :
- 320i 150hp from 11/1992 to 04/1995 (engine code M50B20TU)
- 320i 150hp from 05/1994 to 10/1999 (engine code M52B20)
- 323i 170hp from 03/1995 to 09/1999 (engine code M52B25)
- 325i 192hp from 08/1992 to 07/1995 (engine code M50B25TU)
- 328i 193hp from 07/1994 to 09/1999 (engine code M52B28)

Supplied with gaskets and screws.
With space for lambda sensor.

Consisting of two manifolds with 3 inlet pipes each, inner diameter 42 mm, and 1 outlet pipe, inner diameter 51 mm. 2 connection pipes, inner diameter 51 mm.

ATTENTION :
- Not suitable for Compact
- For manual gearbox only (not for automatic gearbox)
- Not compatible with RHD right-hand drive
- Not suitable for models with OBD (because of 4 lambda connections)

As the downpipes of this manifold are not flanged as standard, it will be necessary to cut the line for installation.

Top of the range, quality guaranteed!