6-in-2 stainless steel sport exhaust manifold for BMW 3 Series E30 6-cylinder - M20 engine with manual gearbox

Details about : 6-in-2 stainless steel sport exhaust manifold for BMW 3 Series E30 6-cylinder - M20 engine with manual gearbox

Sport exhaust manifold 6 in 2 - 100% INOX polished for BMW 3 series E30 with 6-cylinder engine and manual gearbox (including ix 4-wheel drive) :

4-door saloon :
- 320i 6cyl 125hp phase 1 from 01/1983 to 08/1985 (engine code M20B20)
- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)
- 320i 6cyl 129hp phase 2 from 09/1987 to 02/1991 (engine code M20B20)
- 323i 6cyl 139hp phase 1 from 01/1983 to 08/1984 (engine code M20B23)
- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)
- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25)
- 325i 6cyl 170hp phase 2 from 09/1987 to 01/1991 (engine code M20B25)
- 325ix 6cyl 170hp phase 1 from 11/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170hp phase 2 from 09/1987 to 12/1990 (engine code M20B25)

2-door coupé :
- 320i 6cyl 125hp phase 1 from 01/1982 to 08/1985 (engine code M20B20)
- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)
- 320i 6cyl 129hp phase 2 from 09/1987 to 04/1991 (engine code M20B20)
- 323i 6cyl 139hp phase 1 from 12/1981 to 08/1984 (engine code M20B23)
- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)
- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25)
- 325i 6cyl 170hp phase 2 from 09/1987 to 03/1991 (engine code M20B25)
- 325ix 6cyl 170hp phase 1 from 02/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170hp phase 2 from 09/1987 to 02/1991 (engine code M20B25)

Touring :
- 320i 6cyl 129hp from 01/1988 to 04/1991 (engine code M20B20)
- 325i 6cyl 170hp from 07/1987 to 04/1993 (engine code M20B25)
- 325ix cat. 6cyl 170hp from 01/1988 to 12/1992 (engine code M20B25)

Cabriolet :
- 320i 6cyl 129hp from 04/1986 to 09/1990 (engine code M20B20)
- 320i 6cyl 129hp from 10/1990 to 01/1993 (engine code M20B20)
- 325i 6cyl 170hp from 07/1985 to 09/1990 (engine code M20B25)
- 325i 6cyl 170hp from 10/1990 to 01/1993 (engine code M20B25)

Features :
- Internal diameter at manifold outlet: 50 mm
- External diameter: 53 mm

Delivered complete with gaskets and screws.

ATTENTION :
- Not for automatic gearbox versions
- Not suitable for right-hand drive

As the downpipes of this manifold are not flanged as standard, it will be necessary to cut the exhaust line for installation. Depending on which exhaust line you connect to this manifold (original or adaptable), you may need to use adaptor sleeves to match the different pipe diameters.

Top-of-the-range quality guaranteed!