Set of four intake valves for BMW 02 Series E10 Sedan Touring and Cabriolet (01/1968-06/1972) - M05 engine 121 121TI cylinder heads

Details about : Set of four intake valves for BMW 02 Series E10 Sedan Touring and Cabriolet (01/1968-06/1972) - M05 engine 121 121TI cylinder heads

Set of four intake valves 44x103,8x8mm for BMW 02 series E10 Sedan, Touring, Cabriolet and Cabriolet Baur Targa with cylinder head number 121 or 121TI:

Sedan :
- 2002 100hp phase 1 from 01/1968 to 06/1972 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 06/1972 (engine code M05)

Touring :
- 2000 100hp phase 1 from 04/1971 to 06/1972 (engine code M05)
- 2000A auto 100hp phase 1 from 05/1971 to 06/1972 (engine code M05)

Cabriolet :
- 2002 100hp phase 1 from 01/1971 to 06/1971 (engine code M05)

Cabriolet Baur Targa :
- 2002 100hp phase 1 from 06/1971 to 06/1972 (engine code M05)

INFORMATION: There are four different cylinder heads for the 2002 M10 engine. They are identified by a number that can be 121, 121TI, E12 or E21 2.0, located on the intake side, above the fourth cylinder inlet, easily visible when the hood is opened.
From 01/1968 to 06/1972, 2002 carbureted models are fitted with 121 or 121TI cylinder heads with 44mm intake valves. From 06/1972, all 2002s feature a new cylinder head identified E12 (46mm intake valves).

Technical specifications:
- Head diameter: 44mm
- Stem diameter: 8mm
- Length: 103.8mm
- Thrust angle: 45
- Shank type: 3 grooves

Quantity required: 4

This product is sold in packs of four.

Original reference:

11341251880