Wheel, hub & transmission - volkswagen - Special tools manufacturers

Nombre de pièces : 23

A propos de la traduction 1/2" Impact Bit Socket, Spline (XZN), M18x78 mm

UO20442
Customers' note : 29 votes
29 notas
Under 1 week
Under 1 week
15€00

A propos de la traduction Rear Axle Bush Mounting Tool for VW Golf and Audi A3

UO20120
Customers' note : 19 votes
19 notas
In stock
In stock, shipped tomorrow
21 September 2017
78€00
- for mounting the rear axle bushes without
removing the rear axles
- suitable for Audi A3, Volkswagen Gold IV, Bora
1.4 / 1.6 / 1.8 / 2.0 and 1.9D (01-03)
- the bushes can be mounted easily using
a ratchet wrench or spanner

A propos de la traduction 4-piece VW / Audi Subframe Locating Pin Set

UO10206
Customers' note : 22 votes
22 notas
In stock
In stock, shipped tomorrow
21 September 2017
26€00
- for precisely aligned mounting of the subframe
- needed e.g. for replacing the rubber bushings
and all jobs for which the auxiliary frame (subframe)
is removed
- suitable for:
VW Scirocco (09), EOS (06), Golf (09), Golf Plus (05), Jetta (04-06),
Polo (02), Fox (06), Passat (06), Passat CL (09), Audi A3 (04)
and Audi A3 (04), TT (07), A4 (01)
- to be used as OEM T10096

A propos de la traduction 4-piece Subframe Positioning Bolt Set for VW T5

UO40127
 
 
Under 1 week
Under 1 week
31€00
- for precisely aligned mounting of the subframe
- needed e.g. for replacing the rubber bushings
and all jobs for which the auxiliary frame (subframe)
is removed
- suitable for VW T5 from 2004
- to be used as OEM T10227

A propos de la traduction Internal thread for wheel lugs

UO99575
Customers' note : 4 votes
4 notas
In stock
In stock, shipped tomorrow
21 September 2017
32€00
Essential kit for repairing the internal threading of wheel dowels

Applications:

- M12 x 1.25 for PSA
- M12 x 1.5 for Mercedes-Benz & BMW
- M12 x 1.75 for Volvo
- M14 x 1.5 for VAG

Given the nature of the task to be performed, these products are considered consumables.

A propos de la traduction Special Socket 24mm - VAG

UO10303
 
 
In stock
In stock, shipped tomorrow
21 September 2017
15€00
3/4"Drive x 24mm
Bi Hex
Chrome Molybdenum
Special socket
Special socket
Introduced primarily for removing the drive axle s

A propos de la traduction Sockets for VAG hub nuts

UO10488
Customers' note : 9 votes
9 notas
In stock
In stock, shipped tomorrow
21 September 2017
57€00
Set of HEX sockets designed for VAG hub nuts.

T-bar: 1/2"

Socket sizes:

12-point socket: 24, 30, 32 mm
6-point socket: 14, 17 mm

Can be used with an impact spanner.

Supplied in a case

A propos de la traduction Special deep socket - 33 mm - 12-point - 1/2"

UO10740
Customers' note : 20 votes
20 notas
In stock
In stock, shipped tomorrow
21 September 2017
12€50
Size: 33 mm
T-bar: 1/2"
Number of points: 12
Length: approximately 78 mm
Material: chrome vanadium

Impact socket: 33 mm x 1/2" (Bi-Hex) with a length of 78 mm.

A propos de la traduction XZN M18 impact socket - 12-sided with a 1/2" square drive for VW

UO99215
Customers' note : 8 votes
8 notas
In stock
In stock, shipped tomorrow
21 September 2017
14€00
This type of socket must be used on the rear axle ends of the Volkswagen Golf / Jetta and other vehicles with the MK 4 chassis.

Size: M18 x 76 mm

A propos de la traduction Set of specific sockets and end fittings for Volkswagen - 5 pieces

TB00060
 
 
Under 1 week
Under 1 week
39€00
Suitable for rear hubs of VW Touran from 2004 (also Audi A3)

Square: 1/2"
Sizes:
- M18 x 78 mm impact end fitting (Audi A3 and Touran from 2004),
- Torx E24 x 40 mm long socket (Man cylinder head, D20, Mercedes,
Atego, Actros Man calliper)
- End fittings: 6 sides x 14 mm, 6 sides x 17 mm, 6 sides x 19 mm x 55 mm long

A propos de la traduction Tool for rear silentblocs - for VAG

UO12550
 
 
In stock
In stock, shipped tomorrow
21 September 2017
109€00
This tool enables removal/refitting of the rear suspension silentblocs.

Versions:

Seat: Cordoba III (->2003)
Skoda: Fabia (->2000)
VW: Polo IV (->2002)

A propos de la traduction Silent Block Tool for Skoda Fabia, VW Polo

UO40215
 
 
In stock
In stock, shipped tomorrow
21 September 2017
47€00
- for proper and quick installation
of rubber bushings (silent blocks)
on front axle brackets
- suitable for Audi A2, VW Polo IV 9N (02-05),
Skoda Fabia I, Seat Ibiza 6L (02-06)
and Cordoba from 2002
- material: S45C steel
- to be used as OEM 3062, 3253/8, T10037

A propos de la traduction Cardan screw socket for Volkswagen

UO69370
 
 
In stock
In stock, shipped tomorrow
21 September 2017
36€00
Socket for extracting interior drive shaft screws, for the Volkswagen Transporter T4 and Touareg.

Size: 12 mm x 800 mm
Square drive: 1/2

A propos de la traduction Front upper suspension ball joint puller for VW T4

UO99838
 
 
In stock
In stock, shipped tomorrow
21 September 2017
289€00
Suitable for the front upper suspension ball joint of the Volkswagen T4

Contents:
- 1 tempered puller with 24 mm hexagonal drive square
- 3 different pressure plates
- 2 locking forks

Professional case

A propos de la traduction Tools for front silentblocs for VAG

UO70290
 
 
In stock
In stock, shipped tomorrow
21 September 2017
209€00
This kit allows you to install or remove silentblocs positioned behind the front triangles.

Vehicle types:

- Volkswagen Polo (02-07), Volkswagen Fox (02-07)
- Skoda Fabia (02-07) and Seat Ibiza 02 from chassis no. 6K-2-000 001) and the Seat Cordoba(02-07)

A propos de la traduction GEN 2 wheel bearing puller - VAG - 72 mm

UO93370
 
 
Under 1 week
Under 1 week
253€00
Tool kit enabling the installation or extraction of GEN 2 wheel bearings in certain models within the VAG range - 72 mm

Vehicle types:

Audi: A1, A2 (from 2000)
Skoda: Fabia (from 2000), Roomster
Seat: Ibiza (from 2002)
Volkswagen: Fox (from 2005 when the vehicle is fitted with assisted steering), Polo (from 2002 with assisted steering, cf. list of possible used in the attached file)

Sizes: 72 mm

It is essential that the threaded rod is greased before and after each use.

A propos de la traduction GEN2 Wheel Bearing Kit/VAG 85mm

UO11714
 
 
In stock
In stock, shipped tomorrow
21 September 2017
299€00
Application: Volkswagen Toureg, Transporter, Multivan & T5
Generation II style wheel bearings are a wheel bearing and drive flange that cannot be separated.
By using clamp collars and force pegs the tool ensures the loads of insertion are taken only on the outer race of the bearing
For wheel bearings sized 85mm
For wheel bearings sized 85mm
Replacement bar available Part No: 0454 Replacement pin available Part No: 0622 Replacement bearing available Part No 0662

A propos de la traduction GEN2 Wheel Bearing Kit/VAG 62/66mm

UO10811
 
 
In stock
In stock, shipped tomorrow
21 September 2017
389€00
Applications: Audi A2, Volkswagen Lupo, Seat Arosa, Seat Cordoba, Seat Ibiza
Generation II style wheel bearings are a wheel bearing and drive flange that cannot be separated.
By using clamp collars and force pegs the tool ensures the loads of insertion are taken only on the outer race of the bearing
Suitable for 62 & 66mm bearings - always check size of bearing before purchase
Suitable for 62 & 66mm bearings - always check size of bearing before purchase
Replacement bar available Part No: 0453Replacement pin available Part No: 0621 Replacement bearing available Part No 0662

A propos de la traduction Front silentbloc mounting dismounting kit for Volkswagen

UO99490VW
 
 
Under 1 week
Under 1 week
319€00
Possible uses:

- Caddy 111 from 04/2004 to 08/2010
- Eos from 06/2006
- Golf Plus from 01/2005
- Golf V from 10/2003 to 2009
- Golf VI from 10/2008
- Jetta III from 08/2005 to 10/2010
- Touran from 08/2003
- Passat from 03/2005
- Scirocco from 05/2008
- Tiguan from 09/2007

A propos de la traduction Differential Filter Spanner 46mm

TA00050
 
 
In stock
In stock, shipped tomorrow
21 September 2017
25€00
For removing and refitting differential filters - Haldex
46mm offset
Complete with 5mm Hex key
Suitable for filters fitted to Audi TT and Volkswagen 4 motion Golf and Passat models
OEM Tool code T10066

A propos de la traduction Coffret 7 douilles XZN - 1/2"

TA00087
 
 
In stock
In stock, shipped tomorrow
21 September 2017
17€00
Les douilles XZN sont très souvent utilisées dans le domaine automobile telle que pour les freins, la direction...

Tailles : M5 - M6 - M8 - M10 - M12 - M14 - M16
Carré : 1/2"

A propos de la traduction Hose clamp pliers with 2 non-adjustable lugs

TB00217
 
 
In stock
In stock, shipped tomorrow
21 September 2017
76€00
These pliers are used to position hose clamps with 2 non-adjustable lugs when a specific tightening torque is required.

Can be used manually or with a torque wrench.

Square on wrench: 3/8"
7 to 22 Nm tightening torque for this type of clamp

For Volkswagen, Audi, Vauxhall/Opel and Ford

A propos de la traduction Tige filetée pour réf UO11714

TB00994
 
 
In stock
In stock, shipped tomorrow
21 September 2017
46€00
Tige filetée de remplacement pour la référence UO11714.




Il est impératif de graisser la tige filetée avant et après chaque utilisation.



You do not find a product ? Altura