Suspension bearing nut - Automotive Tools

Nombre de pièces : 5

A propos de la traduction Set of sockets for screwing/unscrewing strut nuts

TA00015
Customers' note : 4 votes
4 notas
In stock
In stock, shipped today
26 September 2017
14€90
Pin sockets suitable for Polo, Golf, Audi, Passat and Mercedes-Benz.

Sizes:

no.1: 10.5 x 3.5
no. 2: 12.5 x 3.5
no. 3: 14 x 2.5
no. 4: 14.5 x 3
no. 5: 14.5 x 5

This type of socket is used to lock/unlock the nut that locks the suspension bearing at the top of the strut.

A propos de la traduction Douille pour écrous de paliers de suspension - 22 mm

TA00067
 
 
In stock
In stock, shipped today
26 September 2017
9€00
Ce type de douille permet de bloquer/débloquer l'écrou qui verrouille le palier de suspension en haut de la jambe de force.

Usages : VW Golf MKI et MKII - Audi 80 et 90

Taille : 22 mm

Sur écrou d'origine UNIQUEMENT.

A propos de la traduction Strut Nut Kit 8pc

UO12047
Customers' note : 4 votes
4 notas
In stock
In stock, shipped today
26 September 2017
59€00
A comprehensive set of strut nut tools that cover many applications
Set includes 5 x sockets: 10.5 | 12.5 | 14.5 | 5mm x 60mm | 5.5mm x 47mm
3 x Bits: 16mm x 24mm Hex | 7mm x 22mm Hex
A Internal Ø 10.5mm x 22mm Hex drive 3.5mm pin. B Internal Ø 12.5mm x 22mm Hex drive 3.5mm pin. C Internal Ø 14.5mm x 22mm Hex drive 5mm pin. D Internal Ø 14mm x 22mm Hex drive 3mm pin.
E 5mm x 60mm long - ½"D. F 5mm x 47mm long - ½"D. G Internal bore 15mm - external 22mm - 5mm pins. H Internal bore 12.5mm - external 15.5mm - 3mm pins

A propos de la traduction Jeu de clés à ergots pour amortisseur VAG

FA39811
 
 
Under 1 week
Under 1 week
84€02
- Desserrage et serrage des écrous à crans de tige d'amortisseur.
- AUDI : 80 / 90.
- SEAT : Terra / Ibiza / Marbella / Toledo / Cordoba.
- VOLKSWAGEN : Polo / Golf / Jetta / Passat / Vento
Poid : 70 g.

A propos de la traduction Tool kit for damper - 14 pieces

UO99466
Customers' note : 3 votes
3 notas
In stock
In stock, shipped today
26 September 2017
157€00
This kit is intended for the disassembly of the suspension bearings used in modern dampers.

Contents:

- 7 long push-through sockets in sizes to accommodated the most common damper nuts: 16 mm, 17 mm, 18 mm, 19 mm, 21 mm, 22 mm, 24 mm x 75 mm in length.

- 1 push-through ratchet with a 21 mm hexagonal drive

- 3x 1/2" hexagonal drive connectors: 6 mm, 7 mm, 8 mm used to hold the damper rod.

- 2 flat screw connectors: 5 mm x 8 mm e



You do not find a product ? Altura