Rolling extractor - wheel - Automotive Tools

Nombre de pièces : 13

A propos de la traduction Extracteur de roulements - 25 pièces

TA00014
Customers' note : 7 votes
7 notas
In stock
In stock, shipped
31 July 2017
59€00
Set d'outils pour l'extraction et le montage de roulement de roue.
Ce kit est utilisable pour diverses marques de véhicules.

Matière : acier au carbone forgé et trempé

9 plaques de compression roulements, diamètre extérieur : 55,5, 59, 62, 65, 66, 71,5, 73, 78 et 84 mm
1 x axe d'extraction

3 x cloche d'extraction :

- Ø ext. : 76 mm, 86 mm et 91 mm
- Ø int. : 70 mm, 76 mm et 82 mm

Diverses vis de serrage

Livré dans un coffre rigide

Il est impératif de graisser la tige filetée avant et après chaque utilisation.

A propos de la traduction Ball Bearing Separator, 30-50 mm

UO60212
Customers' note : 17 votes
17 notas
In stock
In stock, shipped
31 July 2017
19€90
- capacity 1-1/4" to 2-1/4" (30mm x 50mm)
- bolt 9.5 x 125 mm, thread 3/8" x 24UNF
- body thread 3/8" x 16UNC
- HRC 42-45°
- forged
- chrome plated


A propos de la traduction Ball Bearing Separator, 50-75 mm

UO60214
Customers' note : 10 votes
10 notas
In stock
In stock, shipped
31 July 2017
29€00
- capacity 2" 1/4"- 3 1/2". (50mm x 75mm)
- bolt 12.7 x 135 mm, thread 1/2" x 20UNF
- body thread 3/8" x 16UNC
- HRC 38-45°
- forged
- chrome plated


A propos de la traduction Ball Bearing Separator, 75-105 mm

UO60216
Customers' note : 3 votes
3 notas
In stock
In stock, shipped
31 July 2017
43€00
- capacity 3" - 4 1/2" (75mm x 105mm)
- bolt 16 x 165 mm, thread 5/8" x 18UNF
- body thread 1/2" x 13UNC
- HRC 42-45°
- forged
- chrome plated


A propos de la traduction Ball Bearing Separator, 100 - 150 mm

UO60218
 
 
In stock
In stock, shipped
31 July 2017
85€00
- capacity 100 to 150 mm
- bolt size: Ø 19 mm, 260 mm
- bolt thread: 3/4" x 16 UNF
- body thread: 5/8" x 11 UNC
- drop forged
- chrome finish


A propos de la traduction Ball Bearing Separator, 150 - 200 mm

UO60220
 
 
In stock
In stock, shipped
31 July 2017
149€00
- capacity 150 to 200 mm
- bolt size: Ø 25.5 mm, 350 mm
- bolt thread: 1" x 12 UNF
- body thread: 3/4" x 10 UNC
- drop forged
- chrome finish


A propos de la traduction Pince pour circlips de roulement de roue

TB00956
 
 
In stock
In stock, shipped
31 July 2017
34€00
Usage : circlips ne disposant pas de prise en forme de trou. Ce type de circlips est trouvé entre autres sur les roulements de roue des modèles PSA, Toyota, Hyundai, Kia , Lexus, Mitsubishi, Daihatsu, Dodge.

Les + produit :

- Le bout de la pince dispose d'un système d'accroche permettant de maintenir le clip en place lors de son extraction.
- Système de ressort & poignée ergonomique.

A propos de la traduction Bearing puller ->55 mm

UO93135
 
 
In stock
In stock, shipped
31 July 2017
63€00
Capacity: up to 55 mm

Comes with a storage box.

It is essential that the threaded rod is greased before and after each use.

A propos de la traduction Internal bearing puller

UO70020
Customers' note : 4 votes
4 notas
In stock
In stock, shipped
31 July 2017
55€00
- Interchangeable heads: diam. 5.5, 6 and 8 mm
- Max. depth of the central rod: 200 mm
- Min. internal socket size: 26 mm
- Max. internal socket size: 103 mm

It is essential that the threaded rod is greased before and after each use.

A propos de la traduction Bearing separator/extractor kit - 12 pieces

UO11531
Customers' note : 4 votes
4 notas
In stock
In stock, shipped
31 July 2017
112€00
This kit enables you to remove crankshaft bearings and bearing shafts & separate bearing housings.

Sizes:

- Separators: diam. 30 - 50 mm, diam. 50 - 75 mm
- Push-rod: 180 mm
- Extenders: 4 x 130 & 4 x 105 mm
- Retaining beam: 160 mm

This kit is suitable for cars, agricultural machines, engineering & and marine engineering.

A propos de la traduction Universal wheel bearing puller / installer - 31 pieces

UO99335
Customers' note : 4 votes
4 notas
In stock
In stock, shipped
31 July 2017
209€00
Contents:

- Pressure plates: Ø 50 / 55 to 59 / 63.3 to 66.6 / 70.3 to 71.5 / 73.1 to 73.4 / 74.8 to 77.5 / 81.5 to 83.4 mm
- Handles with the following diameters: 76 - 86 - 91 - 102 mm
- 3 puller bolts: M12 x 1.5
- 3 puller bolts: M14 x 1.5
- Pin: 7/8" x 300 mm (including thrust bearing)
- Pressure nut: 32 x 60 mm
- Pressure sleeve: Ø 38 x 40 mm
- Washer: Ø 40 x 3 mm

It is essential that the threaded rod is greased before and after each use.

A propos de la traduction Inertia bearing pullers - internal drive

UO99485
 
 
In stock
In stock, shipped
31 July 2017
229€00
Case of inertia bearing pullers consisting of internal drive sockets (bearing in closed bearing housing) enabling the extraction of the majority of bearings.

- Flare diameters:

- 8 mm/10 mm x 100 mm
- 12 mm/15 mm /17 mm x 60 mm
- 20 mm x 95 mm,
- 25 mm/30 mm/32 mm x 60mm

- Supplied with a chrome-plated inertia hammer and an 850 mm-long rod
- Include the internal drive puller and a conical thrust component

Professional quality

A propos de la traduction U.306 - Extractors for exterior grip

FA43414
 
 
Under 1 week
Under 1 week
193€92
- Versatile: assembly in 2 or 3 grips.
Can be turned into an interior grip with claws ref U.306G2 + screws ref U.306-4 or claws ref U.306G20 + screws ref U.306-2.
- Convenience: extractor with spring-loaded self-tightening claws

C min. - max. [mm]: 7 - 140
l x w x h [mm]: 130 x 225 x 262
T [kN]: 30
hex [mm]: 18
Claws: U.306G1
P max. [mm]: 147
Tonnes [t]: 3
Screw: U.306-4
Screw [mm]: 18
[kg]: 1.600


You do not find a product ? Altura