Engine - volkswagen - Special tools manufacturers

Nombre de pièces : 46

A propos de la traduction Exhaust spring clamp removal to Golf 1, 2 & Polo 4

TA00048
 
 
In stock
In stock, shipped today
21 August 2017
29€00
For all Golf 79 to 88 except GTI
For Polo 4

A propos de la traduction RIBE M10 multifaceted socket for ratchet

TA00041
 
 
In stock
In stock, shipped today
21 August 2017
7€50
For Audi and Volkswagen cylinder heads
Square: 1/2

Length: 140 mm

Made from chrome vanadium

A propos de la traduction XZN M12 multifaceted socket for ratchet - 140 mm

GO06400
Customers' note : 92 votes
92 notas
In stock
In stock, shipped today
21 August 2017
15€00
For 1/2" male end piece
To be used to tighten and loosen cylinder head bolts on petrol and Diesel engines for Golf, Passat, Transporter, Polo, etc. and also to remove the steering wheel (passenger compartment) on Golf 4.
Length 140 mm

A propos de la traduction Piston ring compressor for pistons 83 -> 87 mm in diameter

VO06800
Customers' note : 29 votes
29 notas
In stock
In stock, shipped today
21 August 2017
6€90
This tool enables you to reposition your piston in its jacket while compressing the segments, therefore preventing the jacket being scratched or breaking a ring. A real luxury! To be used with pliers.

For pistons 83 mm to 87 mm in diameter


A propos de la traduction Piston ring compressor for pistons 88 -> 94 mm in diameter

VO06900
Customers' note : 13 votes
13 notas
In stock
In stock, shipped today
21 August 2017
6€00
This tool enables you to reposition your piston in its jacket while compressing the segments, therefore preventing the jacket being scratched or breaking a ring. A real luxury! To be used with pliers.

For pistons 88 mm to 94 mm in diameter


A propos de la traduction Douille Polydrive - T52 x 168 mm pour VAG

TB00800
 
 
Under 7 weeks
Under 7 weeks
15€00
Usages : serrage et desserrage des vis de culasse.

Applications :

Pour les moteurs V6, 4 et 5 cylindres Volkswagen & Audi (5 soupapes / cylindre) - à partir de 1998

Taille : T52 x 168 mm

Équivalent à la réf OEM : T10070

A propos de la traduction Diesel Injector Socket 22mm

UO20092
Customers' note : 26 votes
26 notas
In stock
In stock, shipped today
21 August 2017
13€50
For use on Nissan and Volkswagen
Outside diameter 32mm
With window
Bi-Hex format
Manufactured from Chrome Vanadium

A propos de la traduction HT Lead Removal Tool - VW

UO10840
Customers' note : 62 votes
62 notas
In stock
In stock, shipped today
21 August 2017
34€00
For guidance and removal of HT leads on VAG VR6 engines.
Including: Corrado, Golf, Passat, Vento 2.8/2.9.
And Audi 80, 100, A4, A6.
Selected steel.Â
Selected steel.Â
Time saver.

A propos de la traduction Special VW/Audi V6 and TDI turbo spanner

TA00042
 
 
In stock
In stock, shipped today
21 August 2017
16€00
This spanner facilitates the assembly and removal of screws that are difficult to reach.
12 mm hexagon key with 1/2" square
Dimensions:
Depth: 85 mm
Length: 99 mm

A propos de la traduction Hex Bit 13mm

UO10675
 
 
In stock
In stock, shipped today
21 August 2017
7€90
13mm x 100mm
3/8"D
Specifically introduced for Fiat, Seat, Skoda & Vokswagen vehicles
Manufactured from Chrome Vanadium
Manufactured from Chrome Vanadium
For central bolt when replacing the fuel filter

A propos de la traduction Spark Plug Spanner -16/21mm

GO06102
Customers' note : 18 votes
18 notas
In stock
In stock, shipped today
21 August 2017
9€00
Double ended
16mm Hex x 21mm Hex
300mm long
T- Bar function for leverage
T- Bar function for leverage

A propos de la traduction 3-point sickets for Diesel Bosch injection pump

UO70487
Customers' note : 22 votes
22 notas
In stock
In stock, shipped today
21 August 2017
33€00
Set of 2 hollow casings for anti-tamper Diesel Bosch injection pump.

Sizes:

7 mm: socket for Diesel EDC pump cover from 1996 to 2003 (Bosch pump ref: 0986612605)

12.6 mm: socket for Diesel Bosch VE injection pump (Bosch pump ref: 098661750)

Used on VAG systems

A propos de la traduction Set of 5 3-point sockets - M5 - M12 for VAG

UO12115
Customers' note : 13 votes
13 notas
In stock
In stock, shipped today
21 August 2017
21€90
Sizes: M5 (8 mm)/M6 (10 mm)/M8 (12 mm)/M10 (15 mm)/M12 (16.5 mm)
T-bar: 1/2"

These sockets are used on some VAG group vehicles with TDI engines for adjusting the injection pump (PD = pump injector), Bosch injectors.

A propos de la traduction Socket VW 19 / 21 mm

C071047
Customers' note : 5 votes
5 notas
In stock
In stock, shipped today
21 August 2017
16€08

A propos de la traduction 4-piece Glow Plug Connector and Ignition Coil Puller Set

UO09024
Customers' note : 5 votes
5 notas
Under 1 week
Under 1 week
43€00
- for damage free removal of ignition coils
- fits VW engines

A propos de la traduction 17 mm socket for an Volkswagen fuel connection

UO99970VW
 
 
In stock
In stock, shipped today
21 August 2017
17€00
Suitable for the nut on the high-pressure fuel lines in diesel engines.

Sizes:
- 17 mm x 3/8"
- Length: 78 mm

Applications: Volkswagen Passat

Made from chromium vanadium

A propos de la traduction Fuel line clip pliers for VAG

UO85250
 
 
In stock
In stock, shipped today
21 August 2017
31€00
Specially designed for the 3 "tag"-style asymmetrical collars on fuel lines installed in VAG models

A propos de la traduction Tank Sensor Wrench for VAG

UO10629
 
 
In stock
In stock, shipped today
21 August 2017
35€00
- for dismantling of tank sensor unit
- special shape Ø 99 mm
- length: 390 mm

A propos de la traduction Special Socket Set 12-19 mm

UO09091
Customers' note : 6 votes
6 notas
In stock
In stock, shipped today
21 August 2017
63€00
- especially suitable for pipeline fittings
- no widening because foot has special profile
- sizes 12,14,16, 17,18 and 19 mm with 1/2" drive
- angled, slotted socket with double hexagon
- length: 98 mm

A propos de la traduction FSI Injector Assembly and Disassembly Kit

UO10202
 
 
In stock
In stock, shipped today
21 August 2017
119€00
- suitable for VW, AUDI, SEAT, SKODA, with
direct injection engines and engines with
pump-injector units
use as OEM tool kit T10133 + T10163
- includes the following tools:
- puller for dismantling FSI injectors,
use as T10133/1
- puller claw for dismantling FSI injectors,
use as T10133/2
- sliding hammer, use as T10133/3
- cone for mounting the combustion chamber rings
use as T10133/5
- 3 calibration tools for mounting the combustion
chamber rings, use as T10133/6, T10133/7, T10133/8
- built-in pin for mounting the FSI injectors
use as T10133/9
- extractor for dismantling pump-injector units

A propos de la traduction Shaft Drive Belt Pulley Puller

UO10273
 
 
In stock
In stock, shipped today
21 August 2017
74€00
- suitable for:
- VW Passat, Phaeton, Touareg
- Skoda Superb
- Audi A4, A6, A6 Quattro, A8, Allroad, Cabrio, RS4, RS6, S6, S8
- engines / engine codes:
3.0 L V6 30V: ASN, AVK, BBJ
3.7 L V8: AKC, AQG
4.2 V8: ANK, AQF, AQH, AQJ, ARS, ARU, ASG, AWN,
AWU, AVN, AVP, AXQ, BCY, BGH, BGJ, BHX
2.5 L TDI V6 Diesel: AFB, AKE, AKN, AYM, BAU, BCZ,
BDG, BDH, BFC

A propos de la traduction Double Offset Ratchet Wrench for Glow Plugs, 8 and 12 mm

UO10635
Customers' note : 8 votes
8 notas
In stock
In stock, shipped today
21 August 2017
18€90
- for installing and removing glow plugs
- suitable for VW, Audi, Renault Diesel engines
- for glow plugs between engineand Diesel injector pump
- double-hexagon profile
- 8 mm for operation of conductor rail screws
- 12 mm for operation of glow plugs
- length: 300 mm

A propos de la traduction Secorüt resetting unit for VAG up to 2009

UO10918
 
 
In stock
In stock, shipped today
21 August 2017
114€00
Suitable for VAG group vehicles (Audi, VW, Seat, Skoda) up to 2009 equipped with CAN bus or K-line.

It enables the service information for these versions to be reset.

Our electrical devices are non-returnable and non-exchangeable.

A propos de la traduction Mechanical guide tools for Volkswagen

UO69775W
 
 
In stock
In stock, shipped today
21 August 2017
56€00
Engine: 1.9 Tdi pd

Applications: for VW Passat

This kit is used via the front panel, which means the panel can be slid forwards and kept in a position that favours better access for all interventions within the engine compartment.

Sizes:

- M8 x 1.25 mm / diam. 8 mm
- M10 x 1.5 mm / diam. 10 mm
- M8 x 1.25 mm / diam. 17 mm

A propos de la traduction Fuel pump extractor for Volkswagen

UO99350VW
 
 
In stock
In stock, shipped today
21 August 2017
45€00
For Volkswagen vehicles from 2000.

Applications: Polo, Beetle, Golf, Golf Plus, Golf Cab, Jetta, Eos, Scirocco, Passat, Passat CC, CC, Sharan , Touran, Tiguan, Touareg, Phaeton, Caddy, Transporter including utility vehicle models.

Material: steel
Square drive: 1/2"
Internal Ø: 120 mm with 3 slotted teeth for better grip

A propos de la traduction PD injector alignment kit for VAG

UO99600
 
 
Under 1 week
Under 1 week
56€00
Verification of the alignment and adjustment of PD injectors produced by the VAG group.

Applications:

- 2003 Volkswagen Phaeton and Touareg, 2004 T5
- Audi A3 from 2004. (4 cylinders, 4 valves per cylinder, 5-cylinder and 10-cylinder diesel engines)

A propos de la traduction Fuel line clip pliers for VAG

UO99768
 
 
In stock
In stock, shipped today
21 August 2017
32€00
Designed specifically for tightening the clips on the outside of the cardan.
Suitable for transmission shafts measuring a maximum of 108 mm

Applications: Mercedes Benz, Volkswagen, Audi, Skoda and Toyota

A propos de la traduction Diesel filter lever for VAG 2.0 TDi Common Rail

UO99812
 
 
In stock
In stock, shipped today
21 August 2017
33€00
Suitable for VAG 2.0 TDi engines equipped with a UFI paper diesel filter. This lever ensure the correct closure of the filter cover.

Product benefits:

- Equal pressure across the filter cover (fuel leaks are very common if the UFI filter is not correctly positioned)
- Requires the use of just one hand

Material: S45C + chromium molybdenum steel, satin chrome finish
Destocking: 33.00 € ATI instead of 39.00 € ATI, depending on the product availability.

A propos de la traduction Levier pour filtre Diesel pour VAG

TB00634
 
 
In stock
In stock, shipped today
21 August 2017
39€00
Convient pour les véhicules équipés d'un filtre Diesel en papier UFI avec corps du filtre en métal.

Assure un assemblage correct de la cage du filtre sans avoir à courber ou endommager la surface du joint.

Applications : Audi, Volkswagen, Skoda, Seat

A propos de la traduction Socket for exhaust gas temperature sensors for VAG

TB00156
 
 
In stock
In stock, shipped today
21 August 2017
43€00
Ideal for installing and removing exhaust gas temperature sensors.

Examples of motorisations: 1.8 l TFSI/2.0l TFSI/2.0 l FSI/1.6l CRTdi - 2 l Common Rail

Size: 19 mm

A propos de la traduction Ignition coil puller for VAG

UO99588
 
 
In stock
In stock, shipped today
21 August 2017
39€00
This tool is used to remove pencil-type ignition coils in the VAG 4-cyl generation of direct injection 3 petrol engines

Applications: Golf 2013, Audi A3 2013, Seat Leon 2013 and Octavia 2013

Engines: 1.2l 4-cylinder injection / 1.4l l direct injection, turbo compressor and direct injection 4-cyl 2.0l 4v turbo compressor chain drive Generation 111.

A propos de la traduction Crankshaft pinion extraction tool

VO07110
Customers' note : 17 votes
17 notas
In stock
In stock, shipped today
21 August 2017
65€00
Tool for removing the Type 1 crankshaft pinion 70mm and the 3° and 4° gearbox pinions.

A propos de la traduction Crankshaft sensor seal alignment tool for VAG

UO68490
 
 
In stock
In stock, shipped today
21 August 2017
259€00
Models: Golf 2004, Touran 2004, Audi A3 2004

Engines: 4-cylinder diesel, 1.9, 2.0SDI, 2.0 TDi, 2.0 and 2.0 common rail (diesel), 1.4i Turbo in the 2004 models, 1.4-1.6 direct injection (petrol).

A propos de la traduction Outil d'alignement du joint de vilebrequin pour VAG - Réf OEM T10017

TB00924
 
 
In stock
In stock, shipped today
21 August 2017
168€00
Modèles du groupe VAG :

- Seat Arosa, Ibiza, Cordoba, Leon, Toledo, Inca
- Skoda Facia, Octavia, Roomster
- VW Lupo, Polo, Golf, Bora, Beetle, Caddy

Motorisations : 1.4 et 1.6 16V

A propos de la traduction 1/2" Socket, Pro Torque, 36 mm

VO06100
Customers' note : 131 votes
131 notas
In stock
In stock, shipped today
21 August 2017
11€00
- satin chrome plated
- knurled

A propos de la traduction T-Handle Wrench for Hexagon Screws, 3 mm, Length 100 mm

UO10199
Customers' note : 30 votes
30 notas
In stock
In stock, shipped today
21 August 2017
5€00
- black finished
- long end in ball end finish
- 2-component handles

A propos de la traduction Engine support on bench for VW Type 1/Type 4 engine

VO06000
Customers' note : 22 votes
22 notas
In stock
In stock, shipped today
21 August 2017
49€90
This engine support, which fits on a bench, means an engine can be easily worked on at all angles with its pivoting type rotating system, very handy!
Only for VW flat 4-cylinder Type 1 and Type 4 engines.

A propos de la traduction VAG sump cap removal tool - 2.0 l - 4 cylinders

TB00212
 
 
In stock
In stock, shipped today
21 August 2017
19€50
Is used to remove and install VAG plastic sump caps.

Applications: VAG 2.0 4 cyl TDI GEN III engine

Models:

- Golf Mk VII (7),
- Audi,
- Seat Leon 2013<

The plastic sump cap manufacturer's code is 06L-103-801

A propos de la traduction Set of 3 Ribe-type sockets

TB00225
 
 
In stock
In stock, shipped today
21 August 2017
17€00
- Sizes: 6S, 8S, 12S
- Made from chrome vanadium
- Square: 1/2"

- Applications: Nissan, Renault, Toyota
- Examples of uses: clutches, cylinder heads, balancer shaft attachements, etc.

A propos de la traduction VAG piston insertion funnel - engine: VR6 3.2 litre

TB00396
 
 
In stock
In stock, shipped today
21 August 2017
24€00
Applications: Audi TT Quattro Coupe & Volkswagen Golf from 2008
Engine: VR6 3.2 litre
Engine code: CBRA with standard pistons

Practical info:

Before using the tool for the first time, make sure that you pass a well lubricated piston and its bushing through the tool twice and then clean off the plastic shavings.

Made from composite

A propos de la traduction Turbo actuator adjustment set for VAG 2.0L

TB00342
 
 
In stock
In stock, shipped today
21 August 2017
26€00
These tools are used to adjust, remove and replace the pressure capsule with the turbo charge pressure actuator position sensor.

Suitable for 2.0 L Turbo with common rail diesel engines

Applications: Golf 6 (5k), Golf Plus (52), Jetta (1K), Passat (3c), Passat CC (35), Scirocco (13), EOS (1F), Tiguan (5N), Transporter T5 (from 2010 7J, 7H, 7G, 7F).

Includes:

- 1 x 1/4" socket (10 mm - hexagonal x 50 mm) - Manufacturer code T10422
- 1 x 12 point half-moon spanner (10 x 12 mm x 143 mm long) - Manufacturer code T10423

A propos de la traduction Outil pour joint de vilebrequin avant pour VAG 1.8 / 2.0 TFSi Essence

TB00976
 
 
In stock
In stock, shipped today
21 August 2017
32€00
Applications : VAG 1.8/2.0 TFSi moteur Essence à chaîne

Très pratique lors du remplacement du joint avant de vilebrequin

Cet outil est recommandé d'être utilisé avec la référence UO98027 afin d'assurer que le pignon de la chaîne reste bien aligné durant le changement du joint.

Equivalent aux codes constructeurs : T10368 & T10354

A propos de la traduction Kit pour courroie d'entraînement de pompe à carburant pour VAG TDi 2.7 / 3.0

TB00660
 
 
In stock
In stock, shipped today
21 August 2017
179€00
Applications :

- Audi A4 2007-2012, A5 2007-2012, A6 2008-2011, Q5 2008-2012, Q7 2007-2012
- Volkswagen : Phaeton 2007-2015, Touareg 2007-2011 plus
- Porsche Cayenne 2008-2016

Codes moteurs :

2.7 CAMA, CAMB, CGKA, CGKB, CANA, CANB, CANC, CAND
3.0 : CCWB, CCWA, CCLA, CDYA, CDYB, CDYC, CASA, CASB, CCMA, CAS, M05/9E, M05/9D(CAS), CARA, CEXA, CEXB, CASC, CATA, CASD

A propos de la traduction Turbo spanner for VAG - 14 mm

TB00343
 
 
Under 1 week
Under 1 week
12€00
Ideal for accessing the locking nut on the Turbo pressure capsule found on VAG CR 2.0 l Diesel engines.

It will help you release the oil supply pipe and also replace and adjust the Turbo.

Size: 14 mm

A propos de la traduction Valve lifter tool on base

VO06450
Customers' note : 31 votes
31 notas
In stock
In stock, shipped today
21 August 2017
52€00
Spring compression tool for removing/refitting valves which can be attached to your bench for better stability.
For VW Type 1 and Type 4 cylinder heads.

A propos de la traduction Workshop roller trolley for Flat 4 engines

VO05800
Customers' note : 9 votes
9 notas
In stock
In stock, shipped today
21 August 2017
59€90
This steel workshop tool is specifically designed VW Type 1, Type 4, CT or WBX engines, it can easily carry an engine on its own thanks to its 4 solid directional wheels. Ideal when removing/refitting an engine with its U-shaped opening designed for the jack.
Dimensions: 290 x 320 x 165 mm

For all VW flat 4-cylinder engines.



You do not find a product ? Altura