Engine - audi - Special tools manufacturers

Nombre de pièces : 12

A propos de la traduction Shaft Drive Belt Pulley Puller

UO10273
 
 
In stock
In stock, shipped
21 August 2017
74€00
- suitable for:
- VW Passat, Phaeton, Touareg
- Skoda Superb
- Audi A4, A6, A6 Quattro, A8, Allroad, Cabrio, RS4, RS6, S6, S8
- engines / engine codes:
3.0 L V6 30V: ASN, AVK, BBJ
3.7 L V8: AKC, AQG
4.2 V8: ANK, AQF, AQH, AQJ, ARS, ARU, ASG, AWN,
AWU, AVN, AVP, AXQ, BCY, BGH, BGJ, BHX
2.5 L TDI V6 Diesel: AFB, AKE, AKN, AYM, BAU, BCZ,
BDG, BDH, BFC

A propos de la traduction Oil gauge for Audi A6 with automatic transmission

UO99735
 
 
In stock
In stock, shipped
21 August 2017
19€90
For Audi A6 (without gauge):

- 4A, C4 (12/1990 to 07/1994)
- 44, 44Q, C3 (08/1982 to 11/1990)
- 43, C2 (06/1976 to 07/1982)
- C1 (01/1970 to 12/1976)

A propos de la traduction 17 mm socket for an Audi fuel connection

UO99970
 
 
In stock
In stock, shipped
21 August 2017
17€00
Suitable for the nut on the high-pressure fuel lines in diesel engines.

Sizes:
- 17 mm x 3/8"
- Length: 78 mm

Applications: Audi A1, A3, A4, A6, A8

Made from chromium vanadium

A propos de la traduction Mechanical guide tools for Audi

UO69775
 
 
In stock
In stock, shipped
21 August 2017
56€00
Engine: 1.9 Tdi pd

Applications: A4, A5, A6, A8 & Q5

This kit is used via the front panel, which means the panel can be slid forwards and kept in a position that favours better access for all interventions within the engine compartment.

Sizes:

- M8 x 1.25 mm / diam. 8 mm
- M10 x 1.5 mm / diam. 10 mm
- M8 x 1.25 mm / diam. 17 mm

A propos de la traduction Fuel pump extractor for Audi

UO99350
 
 
In stock
In stock, shipped
21 August 2017
45€00
For Audi vehicles from 2000.

Applications: Audi A3 / A4 / A6 / A7 / A8, Q3 / Q5 / Q7, R8, TT

Material: steel
Square drive: 1/2"
Internal Ø: 120 mm with 3 slotted teeth for better grip

A propos de la traduction Cam shaft tensioning wrench - for VAG

UO99585
 
 
In stock
In stock, shipped
21 August 2017
18€00
Applications:

- Seat: Mii / Leon
- Skoda: Octavia / Citigo
- Volkswagen: Up / Golf VII
- Audi: A1 / A3

Designed for use on the most recent range of 1.0ltr, 1.2ltr et 1.4ltr turbo drive systems.

This wrench can be used with the distribution tool kit, ref. UO99564.

A propos de la traduction Ignition coil puller for VAG

UO99588
 
 
In stock
In stock, shipped
21 August 2017
39€00
This tool is used to remove pencil-type ignition coils in the VAG 4-cyl generation of direct injection 3 petrol engines

Applications: Golf 2013, Audi A3 2013, Seat Leon 2013 and Octavia 2013

Engines: 1.2l 4-cylinder injection / 1.4l l direct injection, turbo compressor and direct injection 4-cyl 2.0l 4v turbo compressor chain drive Generation 111.

A propos de la traduction Socket for exhaust gas temperature sensors for VAG

TB00156
 
 
In stock
In stock, shipped
21 August 2017
43€00
Ideal for installing and removing exhaust gas temperature sensors.

Examples of motorisations: 1.8 l TFSI/2.0l TFSI/2.0 l FSI/1.6l CRTdi - 2 l Common Rail

Size: 19 mm

A propos de la traduction VAG sump cap removal tool - 2.0 l - 4 cylinders

TB00212
 
 
In stock
In stock, shipped
21 August 2017
19€50
Is used to remove and install VAG plastic sump caps.

Applications: VAG 2.0 4 cyl TDI GEN III engine

Models:

- Golf Mk VII (7),
- Audi,
- Seat Leon 2013<

The plastic sump cap manufacturer's code is 06L-103-801

A propos de la traduction VAG piston insertion funnel - engine: VR6 3.2 litre

TB00396
 
 
In stock
In stock, shipped
21 August 2017
24€00
Applications: Audi TT Quattro Coupe & Volkswagen Golf from 2008
Engine: VR6 3.2 litre
Engine code: CBRA with standard pistons

Practical info:

Before using the tool for the first time, make sure that you pass a well lubricated piston and its bushing through the tool twice and then clean off the plastic shavings.

Made from composite

A propos de la traduction Diesel filter lever for VAG 2.0 TDi Common Rail

UO99812
 
 
In stock
In stock, shipped
21 August 2017
33€00
Suitable for VAG 2.0 TDi engines equipped with a UFI paper diesel filter. This lever ensure the correct closure of the filter cover.

Product benefits:

- Equal pressure across the filter cover (fuel leaks are very common if the UFI filter is not correctly positioned)
- Requires the use of just one hand

Material: S45C + chromium molybdenum steel, satin chrome finish
Destocking: 33.00 € ATI instead of 39.00 € ATI, depending on the product availability.

A propos de la traduction Kit pour courroie d'entraînement de pompe à carburant pour VAG TDi 2.7 / 3.0

TB00660
 
 
In stock
In stock, shipped
21 August 2017
179€00
Applications :

- Audi A4 2007-2012, A5 2007-2012, A6 2008-2011, Q5 2008-2012, Q7 2007-2012
- Volkswagen : Phaeton 2007-2015, Touareg 2007-2011 plus
- Porsche Cayenne 2008-2016

Codes moteurs :

2.7 CAMA, CAMB, CGKA, CGKB, CANA, CANB, CANC, CAND
3.0 : CCWB, CCWA, CCLA, CDYA, CDYB, CDYC, CASA, CASB, CCMA, CAS, M05/9E, M05/9D(CAS), CARA, CEXA, CEXB, CASC, CATA, CASD



You do not find a product ? Altura